1. If the diesel fuel dispenser keypad does not light, indicating that the keypad li ne is not inserted;
2. If the keypad no words, indicating that the keypad is broken, you need to replace the keypad.
Tank gauging system based on volume, the stock of measurement achieved by measuring the level and temperature. In the tank gauging system based on quality, the stock is measured using a liquid measuring hydrostatic liquid column made. In turn metering inventory control or lose, no matter what method, the reliability and accuracy of measuring instruments is very important.
2017年6月27日星期二
2017年6月22日星期四
How do you stop when you add fuel to the tanker?
Customers in the daily use of the motor can not start the situation, see the following operation:
1. If automatic fuel dispenser is a battery belt, first look at whether the battery is insufficient, need to be fully charged and then refueling;
2. If there is a period of time, the motor may be broken and the motor needs to be replaced;
3. If time is short, is the new machine, may be the motherboard problem, need to replace the motherboard.
1. If automatic fuel dispenser is a battery belt, first look at whether the battery is insufficient, need to be fully charged and then refueling;
2. If there is a period of time, the motor may be broken and the motor needs to be replaced;
3. If time is short, is the new machine, may be the motherboard problem, need to replace the motherboard.
2017年6月17日星期六
How does the tanker display flash?
When the customer is using the fuel dispensing machine, the display flashes. Look at the following:
1. If the display is flashing when standby, you need to change the display;
2. When the diesel fuel dispenser is working, the display flashes. First, it is not a problem with the motor. The motor cable does not go through the computer board, directly connected to the power supply, try the motor better and bad; secondly, remove the motherboard problem. Good, may be the motherboard problem, need to replace the motherboard.
1. If the display is flashing when standby, you need to change the display;
2. When the diesel fuel dispenser is working, the display flashes. First, it is not a problem with the motor. The motor cable does not go through the computer board, directly connected to the power supply, try the motor better and bad; secondly, remove the motherboard problem. Good, may be the motherboard problem, need to replace the motherboard.
2017年6月12日星期一
Customers in the daily use of the tanker motor can not start the situation, see the following operation:
1. If the machine is a new diesel fuel flow meter, the motor voltage is 12V or 24V, whether the power cord lengthened, if there is lengthened, need to change the larger square power cord;
2. If the machine with a period of time, try the motor good and bad, the motor line without a computer board, directly connected to the power supply, if the motor directly connected to the power supply ring, the computer board A connector unplugged received B, if the motor No sound, need to replace the motor;
3. If the display shows E1, or E2, or E5, it indicates that the battery is not fully charged and needs to be fully charged.
2. If the machine with a period of time, try the motor good and bad, the motor line without a computer board, directly connected to the power supply, if the motor directly connected to the power supply ring, the computer board A connector unplugged received B, if the motor No sound, need to replace the motor;
3. If the display shows E1, or E2, or E5, it indicates that the battery is not fully charged and needs to be fully charged.
订阅:
博文 (Atom)